Copyright © 1999-2009 LINDH Teknik. Last updated October 26, 2008
| LVD standards |
LVD-Direktivet 2006/95/EC,
gäller inom EG/EES.
Inom EG gäller beträffande elektriska materiel det s k
lågspänningsdirektivet, LVD, från år 1973. Det innehåller
vissa gemensamma bestämmelser ifråga om all elektrisk materiel
konstruerad för användning vid en märkspänning mellan 50 och
1000 Vac "växelspänning" och mellan 75 och 1500 Vdc
"likspänning" med få undantag, t ex stickproppar,
uttagsmateriel, elmedicinsk utrustning, elmätare och
Ex-materiel.
Produkten anses uppfylla säkerhetsvillkoren om den följer
;
Harmoniserad standard
CEE- och IEC-standard som publicerats i Official Journal. (t.ex.
IEC 61010-1)
Nationell standard i tillverkarens medlemsland om ovan nämnda
standarder saknas.
Nedan uppräknas ett litet axplock på IEC standards som finns och som olika produkter skall uppfylla.
Tungsten filament lamps for domestic and similar general
lighting purposes - Performance requirements
IEC60065 (1998-07)
Audio, video and similar electronic apparatus - Safety
requirements
Environmental testing.
Part 2: Tests. Test Fd: Random vibration wide band - General
requirements
Electrical apparatus for explosive gas atmospheres - Part 0:
General requirements
Electrical apparatus for explosive gas atmospheres - Part 7: Increased safety.
Consolidated edition comprising amendments 1(1991) and 2 (1993)
Electrical apparatus for explosive gas atmospheres - Part 11: Intrinsic safety
Primary batteries - Part 4: Safety standard for lithium
batteries
Series capacitors for power systems - Part 1: General -
Performance, testing and rating - Safety requirements - Guide for
installation
Electrical equipment of industrial machines - Part 1: General
requirements
Safety of machinery - Electrical equipment of machines - Part
32: Requirements for hoisting machines
Safety requirements for radio transmitting equipment
A.C. motor capacitors
Low-voltage fuses - Part 2-1: Supplementary requirements for
fuses for use by authorized persons (fuses mainly for industrial
application) - Sections I to V: Examples of types of standardized
fuses
Electric irons for household or similar use - Methods for
measuring performance
Electric irons for household or similar use - Methods of
measurement of performance
Alpha, beta and alpha-beta contamination meters and monitors
Fire-resisting characteristics of electric cables
Safety of household and similar electrical appliances - Part
1: General requirements (Third edition)
Safety of household and similar electrical appliances - Part
1: General requirements (second edition) *Note. - Second
impression (1983) incorporates Amendments No. 1 (1977), 2 (1979)
and 3 (1982)
Safety of household and similar electrical appliances - Part
2: Particular requirements for vacuum cleaners and water suction
cleaning appliances
Safety of household and similar electrical appliances - Part
2-2: Particular requirements for vacuum cleaners and water
suction cleaning appliances
Safety of household and similar electrical appliances - Part
2: Particular requirements for electric irons
Safety of household and similar electrical appliances - Part
2: Particular requirements for spin extractors
Safety of household and similar electrical appliances - Part
2: Particular requirements for dishwashers
Safety of household and similar electrical appliances - Part
2: Particular requirements for stationary cooking ranges, hobs,
ovens and similar appliances
Safety of household and similar electrical appliances - Part
2-7: Particular requirements for washing machines
Safety of household and similar electrical appliances - Part
2: Particular requirements for washing machines
Safety of household and similar electrical appliances - Part
2: Particular requirements for electric shavers, hair clippers
and similar appliances
Safety of household and similar electrical appliances - Part
2: Particular requirements for toasters, grills, roasters and
similar appliances
Safety of household and similar electrical appliances - Part
2-9: Particular requirements for grills, toasters and similar
portable cooking appliances
Safety of household and similar electrical appliances - Part
2: Particular requirements for floor treatment machines and wet
scrubbing machines
Safety of household and similar electrical appliances - Part
2: Particular requirements for tumbler dryers
Safety of household and similar electrical appliances - Part
2-11: Particular requirements for tumble dryers
Safety of household and similar electrical appliances - Part
2: Particular requirements for warming plates and similar
appliances
Safety of household and similar electrical appliances - Part
2: Particular requirements for deep fat fryers, frying pans and
similar appliances
Safety of household and similar electrical appliances -
Particular requirements for kitchen machines
Safety of household and similar electrical appliances - Part
2: Particular requirements for appliances for heating liquids
Safety of household and similar electrical appliances - Part
2: Particular requirements for food waste disposers
Safety of household and similar electrical appliances - Part
2: Particular requirements for storage water heaters
Safety of household and similar electrical appliances - Part
2: Particular requirements for appliances for skin or hair care
Safety of household and similar electrical appliances - Part
2: Particular requirements for refrigerating appliances and
ice-makers
Safety of household and similar electrical appliances - Part
2: Particular requirements for microwave ovens
Safety of household and similar electrical appliances - Part
2: Particular requirements for clocks
Safety of household and similar appliances - Part 2:
Particular requirements for appliances for skin exposure to
ultraviolet and infrared radiation
Safety of household and similar electrical appliances - Part
2: Particular requirements for sewing machines
Safety of household and similar electrical appliances - Part
2: Particular requirements for battery chargers
Safety of household and similar electrical appliances - Part
2: Particular requirements for room heaters
Safety of household and similar electrical appliances - Part
2: Particular requirements for range hoods
Safety of household and similar appliances - Part 2:
Particular requirements for massage appliances
Safety of household and similar electrical appliances - Part
2: Particular requirements for motor-compressors
Safety of household and similar electrical appliances - Part
2-35: Particular requirements for instantaneous water heaters
Safety of household and similar electrical appliances - Part
2: Particular requirements for commercial electric cooking
ranges, ovens, hobs and hob elements
Safety of household and similar electrical appliances - Part
2: Particular requirements for commercial electric deep fat
fryers
Safety of household and similar electrical appliances - Part
2: Particular requirements for commercial electric griddles and
griddle grills
Safety of household and similar electrical appliances - Part
2: Particular requirements for commercial electric multi-purpose
cooking pans
Safety of household and similar electrical appliances - Part
2: Particular requirements for electrical heat pumps,
air-conditioners and dehumidifiers
Safety of household and similar electrical appliances - Part
2: Particular requirements for pumps for liquids having a
temperature not exceeding 35 °C
Safety of household and similar electrical appliances - Part
2: Particular requirements for commercial electric forced
convection ovens, steam cookers and steam-convection ovens
Safety of household and similar electrical appliances - Part
2: Particular requirements for clothes dryers and towel rails
Safety of household and similar electrical appliances - Part
2: Particular requirements for ironers
Safety of household and similar electrical appliances - Part
2: Particular requirements for portable heating tools and similar
appliances
Safety of household and similar electrical appliances - Part
2: Particular requirements for commercial electric boiling pans
Safety of household and similar electrical appliances - Part
2: Particular requirements for commercial electric grillers and
toasters
Safety of household and similar electrical appliances - Part
2: Particular requirements for commercial electric hot cupboards
Safety of household and similar electrical appliances - Part
2: Particular requirements for commercial electric bains-marie
Safety of household and similar electrical appliances - Part
2: Particular requirements for stationary circulation pumps for
heating and service water installations
Safety of household and similar electrical appliances - Part
2: Particular requirements for oral hygiene appliances
Safety of household and similar electrical appliances - Part
2: Particular requirements for sauna heating appliances
Safety of household and similar electrical appliances - Part
2: Particular requirements for surface-cleaning appliances
employing liquids
Safety of household and similar electrical appliances - Part
2: Particular requirements for electrical appliances for use with
aquariums and garden ponds
Safety of household and similar electrical appliances - Part
2: Particular requirements for projectors and similar appliances
Safety of household and similar electrical appliances - Part
2: Particular requirements for ice-cream appliances with
incorporated motor-compressors
Safety of household and similar electrical appliances - Part
2: Particular requirements for commercial electric dishwashing
machines
Safety of household and similar electrical appliances - Part
2: Particular requirements for insect killers
Safety of household and similar electrical appliances - Part
2: Particular requirements for whirlpool baths
Safety of household and similar electrical appliances - Part
2: Particular requirements for thermal storage room heaters
Safety of household and similar electrical appliances - Part
2: Particular requirements for commercial electric rinsing sinks
Safety of household and similar electrical appliances. Part 2:
Particular requirements for commercial electric water boilers and
liquid heaters
Safety of household and similar electrical appliances - Part
2: Particular requirements for commercial electric kitchen
machines
Safety of household and similar electrical appliances - Part
2: Particular requirements for air-cleaning appliances
Safety of household and similar electrical appliances - Part
2: Particular requirements for electrical water-bed heaters
Safety of household and similar electrical appliances - Part
2: Particular requirements for floor treatment and floor cleaning
machines, for industrial and commercial use
Safety of household and similar electrical appliances - Part
2: Particular requirements for spray extraction appliances, for
industrial and commercial use
Safety of household and similar electrical appliances - Part
2: Particular requirements for wet and dry vacuum cleaners,
including power brush, for industrial and commercial use
Safety of household and similar electrical appliances - Part
2: Particular requirements for milking machines
Safety of household and similar electrical appliances - Part
2: Particular requirements for electric heating appliances for
breeding and rearing animals
Safety of household and similar electrical appliances - Part
2: Particular requirements for automatic machines for floor
treatment for commercial and industrial use
Safety of household and similar electrical appliances - Part
2: Particular requirements for fixed immersion heaters
Safety of household and similar electrical appliances - Part
2: Particular requirements for portable immersion heaters
Safety of household and similar electrical appliances - Part
2: Particular requirements for commercial dispensing appliances
and vending machines
Safety of household and similar electrical appliances - Part
2: Particular requirements for electric fence energizers
Safety of household and similar electrical appliances - Part
2: Particular requirements for pedestrian controlled
mains-operated lawnmowers
Safety of household and similar electrical appliances - Part
2: Particular requirements for outdoor barbecues
Safety of household and similar electrical appliances - Part
2: Particular requirements for high pressure cleaners and steam
cleaners, for industrial and commercial use
Safety of household and similar electrical appliances - Part
2: Particular requirements for fans
Safety of household and similar electrical appliances - Part
2: Particular requirements for foot warmers and heating mats
Safety of household and similar electrical appliances - Part
2-85: Particular requirements for fabric steamers
Safety of household and similar electrical appliances - Part
2-86: Particular requirements for electric fishing machines
Safety of household and similar electrical appliances - Part
2: Particular requirements for humidifiers intended for use with
heating, ventilation, or air-conditioning systems
Safety of household and similar electrical appliances - Part
2: Particular requirements for commercial microwave ovens
Safety of household and similar electrical appliances - Part
2-91: Particular requirements for walk-behind and hand-held lawn
trimmers and lawn edge trimmers
Safety of household and similar electrical appliances - Part
2-95: Particular requirements for drives for vertically moving
garage doors for residential use
Safety of household and similar electrical appliances - Part
2-97: Particular requirements for drives for rolling shutters,
awnings, blinds and similar equipment
Safety of household and similar electrical appliances - Part
2: Particular requirements for humidifiers
Electrical installations of buildings - Part 4: Protection for
safety - Chapter 41: Protection against electric shock
Electrical installations of buildings. Part 4: Protection for
safety. Chapter 43: Protection against overcurrent
Electrical installations of buildings. Part 4: Protection for
safety. Chapter 47: Application of protective measures for
safety. Section 473: Measures of protection against overcurrent
Electrical installations of buildings - Part 5: Selection and
erection of electrical equipment - Chapter 51: Common rules
Electrical installations of buildings. Part 5: Selection and
erection of electrical equipment. Chapter 54: Earthing
arrangements and protective conductors
Electrical installations of buildings. Part 7: Requirements
for special installations or locations. Section 703: Locations
containing sauna heaters
Methods for measuring the performance of electric storage
water-heaters for household purposes
Thermostatic switches primarily for use in equipment for
telecommunications and in electronic applications employing
similar techniques. Part 1: General requirements and measuring
methods
Lampholders for tubular fluorescent lamps and starterholders
Safety specifications for incandescent lamps - Part 1:
Tungsten filament lamps for domestic and similar general lighting
purposes
Safety specifications for incandescent lamps - Part 2:
Tungsten halogen lamps for domestic and similar general lighting
purposes
Voltage bands for electrical installations of buildings
Coupling devices for power line carrier systems
Safety requirements for electronic flash apparatus for
photographic purposes
Safety in electroheat installations. Part 1: General
requirements
Safety in electroheat installations - Part 2: Particular
requirements for resistance heating equipment
Safety in electroheat installations. Part 3: Particular
requirements for mains and medium frequency induction furnace
installations
Safety in electroheat installations - Part 4: Particular
requirements for arc furnace installations
Safety in electroheat installations. Part 5: Specifications
for safety in plasma installations
Safety in electroheat installations. Part 7: Particular
requirements for installations with electron guns
Safety in electroheat installations. Part 8: Particular
requirements for electroslag remelting furnaces
Safety in electroheat installations. Part 9: Particular
requirements for high-frequency dielectric heating installations
Safety in electroheat installations - Part 11: Particular
requirements for installations for electromagnetic stirring,
transport or pouring of metal liquids
Safety in electroheat installations - Part 21: Particular
requirements for resistance heating equipment - Heating and
melting glass equipment
Classification of electrical and electronic equipment with
regard to protection against electric shock - Part 2: Guidelines
to requirements for protection against electric shock
High fidelity audio equipment and systems: Minimum performance
requirements. Part 1: General
Luminaires. Part 2: Particular requirements. Section Nineteen:
Air-handling luminaires (safety requirements)
Medical electrical equipment - Part 1: General requirements
for safety
Medical electrical equipment - Part 1: General requirements
for safety - Section 1: Collateral standard: Safety requirements
for medical electrical systems
Medical electrical equipment - Part 1: General requirements
for safety - 2. Collateral Standard: Electromagnetic
compatibility - Requirements and tests
Medical electrical equipment - Part 1: General requirements
for safety - 3. Collateral standard: General requirements for
radiation protection in diagnostic X-ray equipment
Medical electrical equipment - Part 1: General requirements
for safety - 4. Collateral standard: Programmable electrical
medical systems
Medical electrical equipment - Part 2-1: Particular
requirements for the safety of electron accelerators in the range
1 MeV to 50 MeV
Medical electrical equipment - Part 2: Particular requirements
for the safety of high frequency surgical equipment
Medical electrical equipment - Part 2: Particular requirements
for the safety of short-wave therapy equipment
Medical electrical equipment. Part 2: Particular requirements
for the safety of cardiac defribrillators and cardiac
defribrillator-monitors
Medical electrical equipment. Part 2: Particular requirements
for the safety of ultrasonic therapy equipment
Medical electrical equipment. Part 2: Particular requirements
for the safety of microwave therapy equipment
Medical electrical equipment - Part 2-7: Particular
requirements for the safety of high-voltage generators of
diagnostic X-ray generators
Medical electrical equipment - Part 2: Particular requirements
for the safety of therapeutic X-ray equipment operating in the
range 10 kV to 1 MV
Medical electrical equipment - Part 2: Particular requirements
for the safety of patient contact dosemeters used in radiotherapy
with electrically connected radiation detectors
Medical electrical equipment. Part 2: Particular requirements
for the safety of nerve and muscle stimulators
Medical electrical equipment - Part 2: Particular requirements
for the safety of gamma beam therapy equipment
Medical electrical equipment. Part 2: Particular requirements
for the safety of lung ventilators for medical use
Medical electrical equipment - Part 2-13: Particular
requirements for the safety of anaesthetic workstations
Medical electrical equipment. Part 2: Particular requirements
for the safety of capacitor discharge X-ray generators
Medical electrical equipment - Part 2-16: Particular
requirements for the safety of haemodialysis, haemodiafiltration
and haemofiltration equipment
Medical electrical equipment. Part 2: Particular requirements
for the safety of remote-controlled automatically-driven
gamma-ray afterloading equipment
Medical electrical equipment - Part 2: Particular requirements
for the safety of endoscopic equipment
Medical electrical equipment. Part 2: Particular requirements
for the safety of baby incubators
Medical electrical equipment. Part 2: Particular requirements
for the safety of transport incubators
Medical electrical equipment - Part 2: Particular requirements
for the safety of infant radiant warmers
Medical electrical equipment - Part 2: Particular requirements
for the safety of diagnostic and therapeutic laser equipment
Medical electrical equipment - Part 2: Particular requirements
for the safety of transcutaneous partial pressure monitoring
equipment
Medical electrical equipment - Part 2-24: Particular
requirements for the safety of infusion pumps and controllers
Medical electrical equipment - Part 2: Particular requirements
for the safety of electrocardiographs
Medical electrical equipment - Part 2: Particular requirements
for the safety of electroencephalographs
Medical electrical equipment - Part 2: Particular requirements
for the safety of electrocardiographic monitoring equipment
Medical electrical equipment - Part 2: Particular requirements
for the safety of X-ray source assemblies and X-ray tube
assemblies for medical diagnosis
Medical electrical equipment - Part 2: Particular requirements
for the safety of radiotherapy simulators
Medical electrical equipment - Part 2: Particular requirements
for the safety of automatic cycling indirect blood pressure
monitoring equipment
Medical electrical equipment - Part 2: Particular requirements
for the safety of external cardiac pacemakers with internal power
source
Medical electrical equipment - Part 2: Particular requirements
for the safety of associated equipment of X-ray equipment
Medical electrical equipment - Part 2: Particular requirements
for the safety of magnetic resonance equipment for medical
diagnosis
Medical electrical equipment - Part 2: Particular requirements
for the safety of direct blood pressure monitoring equipment
Medical electrical equipment - Particular requirements for the
safety of blankets, pads and mattresses intended for heating in
medical use
Medical electrical equipment - Part 2: Particular requirements
for the safety of equipment for extracorporeally induced
lithotripsy
Medical electrical equipment - Part 2: Particular requirements
for the safety of electrically operated hospital beds
Medical electrical equipment - Part 2-40: Particular
requirements for the safety of electromyographs and evoked
response equipment
Medical electrical equipment - Part 2-46: Particular
requirements for the safety of operating tables
Electrical installations for outdoor sites under heavy
conditions (including open-cast mines and quarries). Part 2:
General protection requirements
Electrical installations for outdoor sites under heavy
conditions (including open-cast mines and quarries). Part 3:
General requirements for equipment and ancillaries
Electrical installations for outdoor sites under heavy
conditions (including open-cast mines and quarries). Part 5:
Operating requirements
Insulation coordination for equipment within low-voltage
systems - Part 1: Principles, requirements and tests
Insulation coordination for equipment within low-voltage
systems - Part 3: Use of coatings to achieve insulation
coordination of printed board assemblies
Fire hazard testing. Part 1: Guidance for the preparation of
requirements and test specifications for assessing fire hazard of
electrotechnical products. Guidance for electronic components
Fire hazard testing. Part 1: Guidance for the preparation of
requirements and test specifications for assessing fire hazard of
electrotechnical products. Guidance for use of preselection
procedures
Fire hazard testing - Part 2: Test methods - Section 4/sheet
0: Diffusion type and premixed type flame test methods
Fire hazard testing - Part 2: Test methods - Section 4/Sheet
1: 1 kW nominal pre-mixed test flame and guidance
Fire hazard testing - Part 2: Test methods - Section 4/sheet
2: 500 W nominal test flames and guidance
Testing of semiconductor valves for high-voltage d.c. power
transmission
Cabled distribution systems. Part 1: Systems primarily
intended for sound and television signals operating between 30
MHz and 1 GHz
Cabled distribution systems for television and sound signals -
Part 11: Safety
Automatic electrical controls for household and similar use.
Part 2: Particular requirements for thermal motor protectors
Automatic electrical controls for household and similar use.
Part 2: Particular requirements for thermal protectors for
ballasts for tubular fluorescent lamps
Automatic electrical controls for household and similar use.
Part 2: Particular requirements for thermal motor protectors for
motor-compressors of hermetic and semi-hermetic type
Automatic electrical controls for household and similar use -
Part 2: Particular requirements for automatic electrical pressure
sensing controls including mechanical requirements
Automatic electrical controls for household and similar use.
Part 2: Particular requirements for timers and time switches
Automatic electrical controls for household and similar use -
Part 2: Particular requirements for electrically operated water
valves, including mechanical requirements
Automatic electrical controls for household and similar use -
Part 2: Particular requirements for temperature sensing controls
Automatic electrical controls for household and similar use -
Part 2: Particular requirements for electrically operated motor
starting relays
Automatic electrical controls for household and similar use -
Part 2: Particular requirements for energy regulators
Automatic electrical controls for household and similar use -
Part 2: Particular requirements for energy regulators
Automatic electrical controls for household and similar use -
Part 2: Particular requirements for electrically operated door
locks
Isolating transformers and safety isolating transformers.
Requirements
Safety of hand-held motor-operated electric tools - Part 1:
General requirements
Safety of hand-held motor-operated electric tools. Part 2:
Particular requirements for drills
Safety of hand-held motor-operated electric tools. Part 2:
Particular requirements for screwdrivers and impact wrenches
Safety of hand-held motor-operated electric tools. Part 2:
Particular requirements for grinders, polishers and disk-type
sanders
Safety of hand-held motor-operated electric tools. Part 2:
Particular requirements for sanders
Safety of hand-held motor-operated electric tools - Part 2:
Particular requirements for circular saws and circular knives
Safety of hand-held motor-operated electric tools. Part 2:
Particular requirements for hammers
Safety of hand-held motor-operated electric tools. Part 2:
Particular requirements for spray guns for non-flammable liquids
Safety of hand-held motor-operated electric tools. Part 2:
Particular requirements for sheet metal shears
Safety of hand-held motor-operated electric tools. Part 2:
Particular requirements for tappers
Safety of hand-held motor-operated electric tools. Part 2:
Particular requirements for reciprocating saws (jig and sabre
saws)
Safety of hand-held motor-operated electric tools. Part 2:
Particular requirements for concrete vibrators (internal
vibrators)
Safety of hand-held motor-operated electric tools. Part 2:
Particular requirements for chain saws
Safety of hand-held motor-operated electric tools. Part 2:
Particular requirements for planers
Safety of hand-held motor-operated electric tools. Part 2:
Particular requirements for hedge trimmers and grass shears
Safety of hand-held motor-operated electric tools - Part 2:
Particular requirements for tackers
Safety of hand-held motor-operated electric tools. Part 2:
Particular requirements for routers and trimmers
Equipment for continuously monitoring radioactivity in gaseous
effluents. Part 1: General requirements
Electrical penetration assemblies in containment structures
for nuclear power generating stations
Qualification of electrical items of the safety system for
nuclear power generating stations
Safety of laser products - Part 1: Equipment classification,
requirements and user's guide
Safety of laser products - Part 2: Safety of optical fibre
communication systems
Safety of laser products - Part 4: Laser guards
Shunt power capacitors of the self-healing type for a.c.
systems having a rated voltage up to and including 1000 V - Part
1: General - Performance, testing and rating - Safety
requirements - Guide for installation and operation
Alarm systems. Part 1: General requirements. Section Four:
Code of practice
Shunt capacitors for a.c. power systems having a rated voltage
above 1000 V - Part 1: General performance, testing and rating -
Safety requirements - Guide for installation and operation
Marine automatic radar plotting aids (ARPA) - Operational
requirements - Methods of testing and test results
Software for computers in the safety systems of nuclear power
stations
Ballasts for tubular fluorescent lamps - General and safety
requirements
Auxiliaries for lamps - Ballasts for discharge lamps
(excluding tubular fluorescent lamps) - General and safety
requirements
D.C. supplied electronic ballasts for tubular fluorescent
lamps - General and safety requirements
Auxiliaries for lamps - Starting devices (other than glow
starters) - General and safety requirements
Auxiliaries for lamps - A.C. supplied electronic ballasts for
tubular fluorescent lamps - General and safety requirements
Shunt power capacitors of the non-self-healing type for a.c.
systems having a rated voltage up to and including 1000 V - Part
1: General - Performance, testing and rating - Safety
requirements - Guide for installation and operation
Shipborne radar. Operational and performance requirements.
Methods of tests and required test results
Maritime navigation and radiocommunication equipment and
systems - General requirements - Methods of testing and required
test results
Safety of information technology equipment
Applies to information technology equipment including electrical business equipment and associated equipment, with a rated voltage not exceeding 600 V. Specifies requirements intended to ensure safety for the operator and layman who may come into contact with the equipment and, where specifically stated, for service personnel. Supersedes IEC 380 and 435. Consolidated edition incorporating Amendment 1, 2 and 3.
Radiation monitoring equipment for accident and post-accident
conditions in nuclear power plants. Part 1: General requirements
Design for control rooms of nuclear power plants
Self-ballasted lamps for general lighting services - Safety
requirements
Safety requirements for arc welding equipment - Part 1:
Welding power sources
Arc-welding equipment - Part 11: Electrode holders
Programmed digital computers important to safety for nuclear
power stations
Connecting devices for low voltage circuits for household and
similar purposes. Part 1: General requirements
Connecting devices for low voltage circuits for household and
similar purposes. Part 2-1: Particular requirements for
connecting devices as separate entities with screw-type clamping
units
Connecting devices for low-voltage circuits for household and
similar purposes - Part 2-2: Particular requirements for
connecting devices as separate entities with screwless-type
clamping units
Connecting devices for low-voltage circuits for household and
similar purposes - Part 2-3: Particular requirements for
connecting devices as separate entities with insulation piercing
clamping units
Connecting devices for low-voltage circuits for household and
similar purposes - Part 2-4: Particular requirements for twist-on
connecting devices
Connecting devices for low-voltage circuits for household and
similar purposes - Part 2-5: Particular requirements for
connecting boxes (junction and/or tapping) for terminals or
connecting devices
Connecting devices - Safety requirements for screw-type and
screwless-type clamping units for electrical copper conductors -
Part 1: General requirements and particular requirements for
conductors from 0,5 mm2 up to 35 mm2 (included)
Connecting devices - Safety requirements for screw-type and
screwless-type clamping units for electrical copper conductors -
Part 2: Particular requirements for conductors from 35 mm2 up to
300 mm2
Portable neutron ambient dose equivalent ratemeters for use in
radiation protection
Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 1: General requirements
Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 2-010: Particular requirements
for laboratory equipment for the heating of material
Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 2-020: Particular requirements
for laboratory centrifuges
Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 2-031: Particular requirements
for hand-held probe assemblies for electrical measurement and
test
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held current clamps for electrical measurement and test
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 2-041: Particular requirements
for autoclaves using steam for the treatment of medical
materials, and for laboratory processes
Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 2-042: Particular requirements
for autoclaves and sterilizers using toxic gas for the treatment
of medical materials, and for laboratory processes
Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 2-043: Particular requirements
for dry heat sterilizers using either hot air or hot inert gas
for the treatment of medical materials, and for laboratory
processes
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-045: Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields
Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 2-051: Particular requirements
for laboratory equipment for mixing and stirring
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 3: Protocol for the
preparation of conformity verification reports for the IEC 61010
series
Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 3-1: Conformity verification
report for IEC 61010-1
Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 3-1: Conformity verification
report for IEC 61010-1
High range beta and photon dose and dose rate portable
instruments for emergency radiation protection purposes
Marine speed and distance measuring equipment (SDME).
Operational and performance requirements - Methods of testing and
required test results
Electrical measuring instruments - X-Y recorders
Safety of transportable motor-operated electric tools - Part
1: General requirements
Safety of transportable motor-operated electric tools - Part
2: Particular requirements for circular saws
Safety of transportable motor-operated electric tools - Part
2: Particular requirements for radial arm saws
Safety of transportable motor-operated electric tools - Part
2: Particular requirements for planers and thicknessers
Safety of transportable motor-operated electric tools - Part
2: Particular requirements for bench grinders
Safety of transportable motor-operated electric tools - Part
2: Particular requirements for band saws
Safety of transportable motor-operated electric tools - Part
2: Particular requirements for diamond drills with water supply
Safety of transportable motor-operated electric tools - Part
2: Particular requirements for diamond saws with water supply
Safety of transportable motor-operated electric tools - Part
2: Particular requirements for single spindle vertical moulders
Safety of transportable motor-operated electric tools - Part
2: Particular requirements for mitre saws
Safety of transportable motor-operated electric tools - Part
2-10: Particular requirements for cutting-off grinders
D.C. or a.c. supplied electronic step-down convertors for
filament lamps - General and safety requirements
Capacitors for use in tubular fluorescent and other discharge
lamp circuits. General and safety requirements
Transformers for tubular discharge lamps having a no-load
output voltage exceeding 1000 V (generally called
neon-transformers). General and safety requirements
Global maritime distress and safety system (GMDSS) - Part 1:
Radar transponder - Marine search and rescue (SART) - Operational
and performance requirements, methods of testing and required
test results
Global maritime distress and safety system (GMDSS) - Part 2:
COSPAS-SARSAT EPIRB - Satellite emergency position indicating
radio beacon operating on 406 MHz - Operational and performance
requirements, methods of testing and required test results
Global maritime distress and safety system (GMDSS) - Part 3:
Digital selective calling (DSC) equipment - Operational and
performance requirements, methods of testing and required testing
results
Global maritime distress and safety system (GMDSS) - Part 4:
INMARSAT-C ship earth station and INMARSAT enhanced group call
(EGC) equipment - Operational and performance requirements,
methods of testing and required test results
Global maritime distress and safety system (GMDSS) - Part 5:
Inmarsat-E - Emergency position indicating radio beacon (EPIRB)
operating through the Inmarsat system - Operational and
performance requirements, methods of testing and required test
results
Global maritime distress and safety system (GMDSS) - Part 6:
Narrowband direct-printing telegraph equipment for the reception
of navigational and meteorological warnings and urgent
information to ships (NAVTEX) - Operational and performance
requirements, methods of testing and required test results
Global maritime distress and safety system (GMDSS) - Part 7:
Shipborne VHF radiotelephone transmitter and receiver -
Operational and performance requirements, methods of testing and
required test results
Global maritime distress and safety system (GMDSS) - Part 9:
Shipborne transmitters and receivers for use in the MF and HF
bands suitable for telephony, digital selective calling (DSC) and
narrow band direct printing (NBDP) - Operational and performance
requirements, methods of testing and required test results
Global maritime distress and safety system (GMDSS) - Part 12:
Survival craft portable two-way VHF radiotelephone apparatus -
Operational and performance requirements, methods of testing and
required test results
Specifications for unused synthetic organic esters for
electrical purposes
Formal design review
Bayonet lampholders
Double-capped fluorescent lamps - Safety specifications
Double-capped fluorescent lamps - Safety specifications
Single-capped fluorescent lamps - Safety specifications
Single-capped fluorescent lamps - Safety specifications
Low-voltage power supply devices, d.c. output - Performance
characteristics and safety requirements
Connecting devices - Flat quick-connect terminations for
electrical copper conductors - Safety requirements
Amendment 1 to IEC 60065 - Audio, video and similar electronic
apparatus - Safety requirements
Safety of machinery - Electrical equipment of machines - Part
11: General requirements for voltage above 1000 V a.c. or 1500 V
d.c. and not exceeding 36 kV
Amendment 2 to IEC 60335-1: Safety of household and similar
electrical appliances - Part 1: General requirements, subclause
7.12.4
Amendment of IEC 60335-1: Safety of household and similar
electrical appliances - Part 1: General requirements -
Modifications and additions of Clauses 2, 7, 11, 22, 25 and 26
Amendment to IEC 60335-2-3, Ed.4: Safety of household and
similar electrical appliances - Part 2-3: Particular requirements
for electric irons, sub-clause 11.8
Amendment to IEC 335-2-5 (1992, 4th edition): Safety of
household and similar electrical appliances - Part 2-5:
Particular requirements for dishwashers, Clause 7.12.1
Amendment to IEC 335-2-5: 1992, 4th edition - Safety of
household and similar electrical appliances - Particular
requirements for dishwashers, in order to reintroduce the
spillage test
Amendment to IEC 60335-2-7: Safety of household and similar
electrical appliances - Part 2-7: Particular requirements for
washing machines, Clause 7.12.1
Safety of household and similar electrical appliances - Part
2-17: Particular requirements for blankets, pads and similar
flexible heating appliances
Safety of household and similar electrical appliances - Part
2-24: Particular requirements for refrigerating appliances and
ice-markers
Amendment to IEC 60335-2-27: Safety of household and similar
electrical appliances - Part 2: Particular requirements for
appliances for skin exposure to ultraviolet and infrared
radiation
Safety of household and similar electrical appliance - Part
2-34: Particular requirements for motor compressors
Amendment to IEC 60335-2-67: Safety of household and similar
electrical appliances - Part 2-67: Particular requirements for
floor treatment and floor cleaning machines for industrial and
commercial use
Amendment to IEC 60335-2-80: Safety of household and similar
electrical appliances - Part 2-80: Particular requirements for
fans, subclauses 7.12.1, 8.2, 22.1
Safety of household and similar electrical appliances -
Particular requirements for service machines and amusement
machines
Safety of household and similar electrical appliances - Part
2: Particular requirements for electrically heated roof gullies
Safety of household and similar electrical appliances - Part
2-84: Particular requirements for toilets
Safety of household and similar electrical appliances - Part
2-87: Particular requirements for electric animal-stunning
equipment
Safety of household and similar electrical appliance - Part
2-89: Particular requirements for refrigerated commercial
cabinets with or without incorporated compressors
Safety of household and similar appliances - Part 2:
Particular requirements for lawn scarifiers
Safety of household and similar electrical appliances - Part
2: Particular requirements for powered shredders
Safety of household and similar electrical appliances - Part
2: Particular requirements for scissor type grass-shears
Safety of household and similar electrical appliances - Part
2-96: Particular requirements for flexible sheet heating elements
for room heating
Particular requirements for the safety of electric toys
IEC 335-2-101: Safety of household and similar electrical
appliances - Part 2: Particular requirements for plug-in
vaporizers
Safety of household and similar electrical appliances -
Part2-103: Particular requirements for drives for gates, doors,
and windows
New Section IEC 364-7-718: Electrical installations of
buildings - Part 7: Requirements for special installations or
locations - Section 718: Electrical installation and safety power
supply in communal facilities
Safety in electroheat installations - Part 10: Particular
requirements for electric surface heating systems
Third edition of IEC 60601-1 - Medical electrical equipment -
Part 1: General requirements for safety and essential performance
Medical electrical equipment - Part 1: General requirements
for safety - 1. Collateral standard: Safety requirements for
medical electrical systems
Medical electrical equipment - Part 1: General requirements
for safety - 2. Collateral standard: Electromagnetic
compatibility - Requirements and tests
Amendment to 60601: Medical electrical equipment - Part 1-4:
General requirements for safety - Collateral standard:
Programmable electrical medical systems
Medical electrical equipment - Part 1: General requirements
for safety - 5. Collateral standard: Image quality and dose for
X-ray equipment
Medical electrical equipment - Part 1: General requirements
for safety - 6. Collateral Standard: Analysis, test and
validation of human factors compatibility
Medical electrical equipment - Part 1: General requirements
for safety - 7. Collateral standard: General requirements for
multiparameter patient monitoring equipment
Medical electrical equipment - Part 2: Particular requirements
for the safety of high frequency surgical equipment
Particular requirements for the safety of cardiac
defibrillators (Revision of IEC 60601-2-4)
Medical electrical equipment - Part 2-5: Particular
requirements for the safety of ultrasonic physiotherapy equipment
Medical electrical equipment - Part 2: Particular requirements
for the safety and essential performance of transcutaneous
partial pressure monitoring equipment
Medical electrical equipment - Part 2-29: Particular
requirements for the safety of radiotherapy simulators
Medical electrical equipment - Part 2-30: Particular
requirements for safety, including essential performance, of
automatic cycling non-invasive blood pressure monitoring
equipment
Amendment to IEC 60601-2-33: Medical electrical equipment -
Part 2: Particular requirements for the safety of magnetic
resonance equipment for medical diagnosis
Revision of IEC 60601-2-34: Medical electrical equipment -
Part 2: General requirements for the safety and essential
performance of invase blood pressure monitoring equipment
Medical electrical equipment - Part 2: Particular requirements
for the safety of ultrasonic medical diagnostic and monitoring
equipment
Medical electrical equipment - Part 2: Particular requirements
for the safety of peritoneal dialysis equipment
Medical electrical equipment - Part 2-41: Particular
requirements for the safety of surgical luminaires and luminaires
for diagnosis
Medical electrical equipment - Part 2: Particular requirements
for the safety of Automatic or Advisory External Defibrillators
(AEDs)
Medical electrical equipment - Part 2: Particular requirements
for the safety of X-ray equipment for interventional procedures
Medical electrical equipment - Part 2: Particular requirements
for the safety of X-ray equipment for computed tomography
Medical electrical equipment - Part 2-45: Particular
requirements for the safety of mammographic X-ray equipment and
mammographic stereotactic devices
Medical electrical equipment - Part 2: Particular requirements
for the safety of ambulatory electrocardiographic monitors
(Holter monitors)
Medical electrical equipment - Part 2-50: Particular
requirements for the safety of infant phototherapy equipment
Amendment to IEC 60745-1, Ed.2: Safety of hand-held
motor-operated electric tools - Part 1: General requirements
Safety of hand-held motor-operated electric tools - Part 2-1:
Particular requirements for drills
Safety of hand-held motor-operated electric tools - Part 2-2:
Particular requirements for screwdrivers and impact wrenches
(Revision of IEC 60745-2-2)
Safety of hand-held motor-operated electric tools - Part 2:
Particular requirements for grinders, polishers and disk-type
sanders (Revision of IEC 745-2-3)
Safety of hand-held motor-operated electric tools - Part 2-4:
Particular requirements for sanders
Safety of hand-held motor-operated electric tools - Part 2-8:
Particular requirements for sheet metal shears
Safety of hand-held motor-operated electric tools - Part 2-9:
Particular requirements for tappers
Safety of hand-held motor-operated electric tools - Part 2-11:
Paricular requirements for reciprocating saws (jig and saws)
Safety hand-held motor operated electric tools - Part 2:
Particular requirements for chain saws (Revision of IEC 745-2-13)
Safety of hand-held motor-operated electric tools - Part 2-14:
Particular requirements for planers
Safety of laser products - Part 5: Manufacturer's checklist
for IEC 60825-1 - Part 1: Equipment classification, requirements
and user's guide
Amendment 1 to IEC 60928: Auxiliaries for lamps - A.c.
supplied electronic ballasts for tubular fluorescent lamps -
General and safety requirements
Low-voltage switchgear and controlgear - Part 7-3: Ancillary
equipment - Safety requirements for terminal blocks for the
reception of cartridge fuse-links
Connecting devices - Safety requirements for screw-type
clamping units for electrical copper conductors - Part 1: General
requirements for conductors from 0,2 mm2 up to 35 mm2 (included)
Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 2-031: Safety requirements for
hand-held probe assemblies for electrical measurement and test
Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 2-045: Particular requirements
for washer-disinfectors used in medicak, pharmaceutical,
veterinary and laboratory fields
Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 2-071: Particular requirements
for equipment used in extended environments
Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 2-081: Particular requirements
for automatic amd semi-automatic analytical equipment
Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 3-010: Conformity verification
report for IEC 61010-2-010
Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 3-020: Conformity verification
report for IEC 61010-2-020
Safety requirements for electrrical equipment for measurement,
control and laboratory use - Part 3-032: Conformity verification
report for IEC 61010-2-032
Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 3-041: Conformity verification
report for IEC 61010-2-041
Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 3-042: Conformity verification
report for IEC 61010-2-042
Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 3-051: Conformity verification
report for IEC 61010-2-051
Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 3-061: Conformity verification
report for IEC 61010-2-061
Amendment to IEC 61029-2-7: Safety of transportable
motor-operated electric tools - Part 2-7: Particular requirements
for diamond saws with water supply
Safety of transportable motor-operated electric tools - Part
2: Particular requirements for mitre-bench saws
Global maritime distress and safety system (GMDSS) - Part 8:
Shipborne watchkeeping receivers for the reception of digital
selective calling (DSC) in the maritime MF, MF/HF and VHF bands -
Operational and performance requirements, methods of testing and
required test results
Maritime navigation and radiocommunication equipment and
systems - Global maritime distress and safety system (GMDSS) -
Part 10: Inmarsat-B Ship earth station equipment - Operational
and performance requirements - Methods of testing and required
test results
Safety of machinery - Indication, marking and actuation - Part
3: Requirements for the location and operation of actuators
Specification for lamp controlgear - Part 1: General and
safety requirements
Wind turbine generator systems - Part 1: Safety requirements
Safety of machinery - Electro-sensitive protective equipment -
Part 3: Particular requirements for equipment using active
opto-electronic devices responsive to diffuse reflection
(AOPDDRs)
Functional safety of electrical/electronic/programmable
electronic safety-related systems - Part 1: General requirements
Functional safety of electrical/electronic/programmable
electronic safety-related systems - Part 2: Requirements for
electrical/electronic/programmable electronic safety-related
systems
Functional safety of electrical/electronic/programmable
electronic safety-related systems - Part 3: Software requirements
Nuclear power plants - Intrumentation and control for systems
important to safety - General requirements for computer-based
systems
Safety of poewr transformers, power supply units and similar -
Part 2-3: Particular requirements for ignition transformers for
gas-oil burners
Safety of power transformers, power supply units and similar -
Part 2-13: Particular requirements for auto-transformers
Safety of power transformers, power supply units and similar -
Part 2-15: Particular requirements for isolating transformers for
the supply of medical locations
Safety of power transformers, power supply units and similar -
Part 2-19: Particular requirements for transformers with midpoint
used for mains borne perturbation attenuation
Safety of power transformers, power supply units and similar -
Part 2-20: Particular requirements for small reactors
Safety of power transformers, power supply units and similar -
Part 2-23: Particular requirements for transformers for
construction sites
Safety testing requirements for PV modules
Safety requirements of tables for hand-held circular saws with
a maximum saw-blade diameter of 315 mm for the use as saw benches
Special requirements for insulated flat quick-connect
terminations for copper conductors - Safety requirement
Safety of hand-held battery-powered motor-operated tools and
battery packs - Part 1: General requirements
Safety of hand-held battery-powered motor-operated tools and
battery packs - Part 2: Particular requirements for drills and
impact drills
Safety of hand-held battery-powered motor-operated tools and
battery packs - Part 2: Particular requirements for screwdrivers
and impact wrenches
Safety of hand-held battery-powered motor-operated tools and
battery packs - Part 2: Particular requirements for sanders with
the exception of disc-type sanders which are covered by IEC 62043
Safety of hand-held battery-powered motor-operated tools and
battery packs - Part 2: Particular requirements for all types of
circular saws for cutting wood and similar materials and circular
knives
Safety of hand-held battery-powered motor-operated tools and
battery packs - Part 2: Particular requirements for hammers
including rotary hammers
Safety of hand-held battery-powered motor-operated tools and
battery packs - Part 2: Particular requirements for spray guns
for non-flammable materials
Safety of hand-held battery-powered motor-operated tools and
battery packs - Part 2: Particular requirements for sheet metal
shears and nibblers
Safety of hand-held battery-powered motor-operated tools and
battery packs - Part 2: Particular requirements for all types of
reciprocating saws
Safety of hand-held battery-powered motor-operated tools and
battery packs - Part 2: Particular requirements for routers and
laminate trimmers
Medical electrical equipment - Particular requirements for the
safety of radiation therapy treatment planning systems
För att hitta flera uppdaterade och publicerade harmoniserade standarder titta även på sida http://europa.eu.int
LINDH Teknik är ett litet företag som kan hjälpa dig med CE-märkning för uppfyllande av LVD-direktivet.
De viktigaste arbetsuppgifterna är konsultarbete inom LVD - genomgång och certifiering för industri- och lab-utrustning för att ingå i en teknisk file.
|
|
|
|
Copyright © 1999-2009 LINDH Teknik. Last updated October 26, 2008
|
|